Home >> Tungsten Carbide Rods >>Tungsten Carbide Rod with Coolant Hole

Tungsten Carbide Rod with Coolant Hole

Tungsten carbide rod with coolant hole is made of tungsten carbide material, which is known as "the Teeth of Industry". Therefore, it shows the superiorities of tungsten carbide, which is extremely high hardness and it resist wear and abrasion well.

Tungsten carbide rod with coolant hole has a wide range of application, such as producing finished cutting tools, such as twist drills, mills, reamers, taps and burrs etc., besides these, they are also widely applied to produce processing tools of making printed circuit boards (PCB), such as micro-drills, big-head drills and gravers etc.


The following table shows some of Chinatungsten Online's grades for manufacturing tungsten carbide rod with coolant hole:

(%) g/cm3 HRA N/mm2
YG8 K30 8 14.80 89.5 2200
YG6 K20 6 14.95 90.5 1900
YG6X K10 6 14.95 91.5 1800
YL10.2 K30 10 14.50 91.8 2400
YG13 K30-K40 13 14.30 89.5 2600
YG15 K40 15 14.00 87.5 2800

Chinatungsten Online assures our tungsten carbide rods with coolant hole having the following superiorities based on the 20 years' experience in tungsten carbide industry:
1. 100% raw material;
2. High precision control on the dimensions;
3. High wear & corrosion resistance;
4. Stable physical & chemical properties;
5. Anti-deformation & deflection;
6. Customized design is accepted.

More Info>>

1.Tungsten Carbide
2.Tungsten carbide Balls
3.Tungsten carbide Burrs
4.Tungsten Carbide Inserts
5.Tungsten Carbide Plates

CHINATUNGSTEN ONLINE has been specialized in manufacturing tungsten products, especially cemented carbide products for more than 20 years. If you have any inquires concerning the products in this website, please do not hesitate to e-mail us by :

Address: 3F, No.25 WH Rd., Xiamen Software Park Ⅱ, FJ 361008,China
Certified by MIIT:闽B2-20090025 闽ICP备05002525号-1
Copyright ©1997 - 2018 ChinaTungsten Online All Rights Reserved